CCNA training in Jalandhar

ccna CCNA training in jalandhar CCNA. ccna

Electrom solution is the best place for CCNA training in Jalandhar .Training in Electrom solution provides one hundred period, sensible and placement targeted CCNA Training in Jalandhar. Our CCNA course concentrates from basic level coaching to advanced level coaching. Our CCNA coaching in fully targeted to urge placement and certification on CCNA once completion of our course. Our team of CCNA trainers ar CCNA certified professionals with a lot of periodexpertise in live comes. Our CCNA Course course of study is enough for anyone UN agency needs to urge CCNA certification that meets trade expectations. In our course arrange, you’ll learn Networking ideas,OSI – Model,TCP/IP Model & Ipv4 Addressing, with practical exercises and live examples.

CCNA Course Syllabus in Electrom Solution,Jalandhar

Networking concepts

  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring in CCNA training in Jalandhar

OSI – Model

  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]

TCP/IP Model & Ipv4 Addressing

  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc in CCNA training in Jalandhar

Subnetting

  • Default Subnet Mask
  • Class C Subnetting & Practice no. given
  • Class B Subnetting & problems
  • Class A Subnetting & problems in CCNA training in Jalandhar

Introduction to IPV6

  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Translations between ipV4 and ipV6
  • Summary

Basic of Router & Configuration

  • Selection of Router & Cabling a Route
    • When Router used – LAN with WAN connect – to connect networks of different IP
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • Cables used in different interfaces/purpose of interfaces
    • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
    • Different CISCO series – modular/fixed – 10mbps/100 etc
    • Straight through between DTE & DCE in CCNA training in Jalandhar

Different modes of operation & basic commands

  • Internal Components:
    • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • DRAM -Running Config
    • NVRAM – Startup Config
    • Flash MEM – IOS
  • Different Modes:
    • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
    • User -Privilege – Global – Sub-configuration mode
    • Syntax/command to switch between modes
    • Assigning IP address for -E0-S0-S1
    • Enabling/disabling – console/privilege / vty password
    • Mold – command
    • Show Config / start / run / version / flash
  • Basic commands practice
    • Changing between modes – (user-privilege- Global-etc)
    • IP address configuration-E0-S0-S1
    • Password – enabling – encrypting it
    • Practice – motd – show commands – editing commands
    • Assigning host name (for Router)
  • Advanced Commands
    • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
    • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
    • Practice an above commands as well as following
    • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
    • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
    • Overview of Cisco SDM (Security Device Manager) in CCNA training in Jalandhar

IP Routing

  • IP Routing, Static Routing & Default Routing in CCNA training in Jalandhar
    • IP routing – static routing – default- dynamic routing
    • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
    • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
    • Practical-session for Static & default routing CCNA training in Jalandhar
  • Dynamic Routing and RIP
    • Dynamic Routing – IGP & EGP
    • IGP – RIP-OSPF – EGRP – EIGRP
    • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
    • Role of Routing Protocol – builds/updates/selects & Routes the packet CCNA training in Jalandhar
    • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
    • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
    • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
    • Command – Router RIP Network
    • Sh IP route
    • Timer value for RIP– Update/Invalid/ hold down/flush Timer in CCNA training in Jalandhar
  • RIP
    • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
    • Limitations of distance vector algorithm
    • Features of EIGRP and its operations
    • Configuring EIGRP – “Auto-redistribution”
    • Verify and troubleshooting EIGRP
    • Features of OSPF and its operation
    • Configuring single area OSPF
    • Verify and troubleshoot OSPF in CCNA training in Jalandhar
  • Access List
    • Purpose/advantage of Access-list
    • IP [-for a host – for a network/sub network].
    • Std IP access-list – wild card calculation
    • Extd IP access list
    • Switch port ACL
    • Step involved in creating access list
    • Applying access list at the interface – (inbound/outbound)
    • Named access-list for IP
    • Access-list in Telnet sessiont
  • IP standard Access List
    • Practical on
    • IP Std access-list
  • IP Extended Access List
    • IP Extd access-list, named access lists
  • NAT
    • Implement, Verify & Troubleshoot NAT
      • Explain the Basic Operation Of NAT
      • Using (including CLI/SDM)
      • Practicals on Static NAT, Dynamic NAT and PAT
      • Troubleshoot NAT issues
  • WAN Technologies CCNA training in Jalandhar
    • WAN Technologies- Leased Line
      • Leased line
      • P to P communication
      • HDLC & PPP protocol-features
      • Enabling HDLC & PPP
    • PPP Link CCNA training in Jalandhar
      • PPP layer & its explanation/role
      • PAP/CHAP role
      • Configuring PAP/CHAP using commands
    • VPN
      • Describe VPN technology
      • Importance Of VPN
      • Benefits & Role
      • Impact & Components
    • Frame-Relay CCNA training in Jalandhar
      • Packet Switched Network
      • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
      • Enabling Frame-relay
      • Inverse ARP
      • Configuring frame-relay for
      • Mesh Network
      • Star Network CCNA training in Jalandhar
      • Combination of above two
  • Switching CCNA training in Jalandhar
    • Switching Operation and Configuration
      • Function –add-learning / Forward-filters the Frame / loop avoidance
      • Redundant path and its problems
      • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
      • Modes of operation of switch/Bridge
      • Port duplexing
      • Switch & hub – half duplex
      • Switch & Server – full duplex
      • CISCO catalyst switch 1912 & 1924 interface details
      • M/K/I modes
      • Basic and advanced commands
      • Enabling & configuring MAC address table
    • VLAN Configuration
      • VLAN – ISL – Trunking
      • Enabling Trunking
      • Assigning VLAN No. & name
      • Configuring ports to a specific VLAN
      • VTP purpose
      • VTP domain
      • VTP modes of operation CCNA training in Jalandhar
      • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
      • Implement Basic Switch Security (including Port Security , Trunk access .etc )
  • Wireless LAN
    • Wireless Intro & Operation
      • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
      • Ad-hoc mode, infrastructure mode
      • SSID, BSS, ESS
      • Basic Parameters to configure on a Wireless Network
      • Wireless Security Feature’s (WEP, WPA 1 / 2 )
      • Implementing Wireless Networks

 For CCNA training in Jalandhar  feel free to contact :-